Five Axis 200mm Alumimum CNC Water Jet Cutter
Water jet cutter cutting process for metal :
Among the many cutting methods and instruments, the water cutting technology used by the water jet cutting machine belongs to a special cold cutting technology. The use of abrasives is also called medium, which makes this cutting method extremely sharp. The cutting method can be regarded as a kind of subtle physical "corrosion", the small cracks on the metal are continuously expanded in water and media, and then continuously expanded, and finally the metal is cut. There is no chemical change in the entire cutting process of the water jet cutting machine, so that the material of the cutting material is not affected. And there is no thermal deformation in the whole process, so that it has the advantages of narrow slit, high precision, smooth cut surface, clean and pollution-free.
how to improve water jet cutting speed:
1. Set the appropriate cutting process and data
Generally speaking, waterjet cutting machines need to punch holes before cutting. The length of the punching time depends on the thickness and hardness of the material. When the material is harder or thicker, the dynamic punching speed will be much faster than the static punching speed. If the material is not glass, there is no need to reduce the pressure to punch holes, and use a higher pressure to increase the cutting speed. Choosing a large gem will also increase the water flow and increase the cutting speed. In the case of the most demanding speed, the use of a small-caliber sand mixing tube can increase the cutting speed, but the sand mixing tube will wear faster.
2. Use appropriate abrasive sand
Choosing the right abrasive sand can greatly improve the cutting speed. Generally speaking, the abrasive sand with a small mesh can speed up the cutting speed. But the mesh number should not be so small that it jams the sand mixing pipe. For example, the 0.76 sand mixing pipe is not very suitable for 60 mesh abrasive sand.
Three, use nesting software
Using nesting software, you can achieve as much co-edge as possible, reduce punching, and cut in sequence as close as possible to avoid the knife head running back and forth.
Application of water jet cutter :
Waterjet can be widely used in cutting various materials such as metal, ceramics, stone, glass, cement, paper, rubber, plastic, cloth, polyurethane, wood, leather, ammunition, etc.
60000psi triplex pump
| | |
| Our servo motor Direct drive pump | - Cutting speed is 20% higher at the same pressure with intensifier pump
- Working noise is only 40DB
- Smaller size
- Only 15kw, Save 60% electricity cost. The whole machine is only with 30kw, Instantaneous current is 30A, working current is 30A. the motor only start work if you open high pressure valve.
- Can work 24 hours
- Save sand and water if cut same pieces as intensifier pump. Or cut more pieces within the same cutting hours. As we tested, for a stone cutting factory, can save about USD 15000 cutting cost.
- We requests maintenance every 250-300 high pressure cutting hours.
|
Product Tags:
|
|
200mm Alumimum Carbon Steel CNC Water Jet Cutter With Five Axis Images
|
